SAP E-S4CON-2025 Dumps Updated Mar 07, 2026 WIith 43 Questions
View All E-S4CON-2025 Actual Free Exam Questions Mar 07, 2026 Updated
NEW QUESTION # 22
Which step can be optimized when you provide the MIGRATE_DT_DURXML file to SUMM?
- A. Silent data migration (SDM)
- B. Downtime conversion
- C. Shadow on target creation
- D. Downtime migration
Answer: D
NEW QUESTION # 23
Which of the following SUM activitiies require a stack XML file calculated by the mainteenance planner? Note: There are 3 correct answers to this question.
- A. SAP S/4HANA conversion without DMO
- B. Prerequisite check
- C. Benchmark tool
- D. SAP S/4HANA conversion inncluding DMO
- E. DMO without system update
Answer: A,B,D
NEW QUESTION # 24
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime annd 80 parallel R3load processes during downtime. You have chosen table count verification, but not table contents comparison.
Phase EU_CLONE MIG_DT_RUN is running In the Charts Control Center, you can see 400 process buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
- A. Without table contents commparison, only 40 R3load processes are being started.
- B. SUM is still running in uptimme; the 40 defined R3load processes are considered.
- C. There are 40 R3load processses used for copying and 40 R3load processes for taable count verification.
- D. These are 40 pairs of R3load processes, so there are 80 R3load processes running
Answer: D
NEW QUESTION # 25
You are executing as SAP S/4HANA Conversion with scenario strategy Standard. When will the shadow instance be stopped for thee last time?
- A. At the end of the downtimee
- B. As part of the cleanup process
- C. Before the downtime startss
- D. Early in the downtime
Answer: C
NEW QUESTION # 26
You are performing an SAP S/4HANA conversion with the migration repetition option. After which phase does SUM stop to enable a teest cycle?
- A. EU CLONE MIG_DT_RUN
- B. EU_CLONE MIG_DT_CREATTE
- C. EU IMPORT ALL
- D. EU_CLONE MIG SOT RUN
Answer: A
NEW QUESTION # 27
What SAP systems can you use for the ABAP Test Cockpit (ATC) to perform the custom code analysis for an SAP S/4HANA conversion? Note: There are 2 correct answers to this question.
- A. SAP ECC system from SAP ERP 6.0 EHP 8
- B. Standalone AS ABAP with SAP BASIS 752
- C. SAP S/4HANA Server 2022
- D. SAP Solution Manager 7.2
Answer: B,C
NEW QUESTION # 28
You are running an SAP ECC system .
For which of the following activitiess does SUM allow you to use the near-Zero Downtimme Maintenance (nZDM) capabilities? Note: There are 3 correct answers to this question.
- A. Use DMO for SUM.
- B. Perform an SAP S/4HANA conversion without DMO.
- C. Apply SAP Support Packagees.
- D. Upgrade the SAP system.
- E. Perform an SAP S/4HANA conversion including DMO.
Answer: A,C,D
NEW QUESTION # 29
How does SUM recognize modificattion adjustment transports from predecessor systemms?
- A. By searching for transport requests that are assigned to project SAP ADJUST
- B. By searching for transport requests in file umodauto.lst
- C. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- D. By searching for transport requests named <sid>KO<number>
Answer: B
NEW QUESTION # 30
You are performing an SAP S/4HANA conversion. You are in the BIND PATCH phase of the Configuration roadmap step. For soome software components, you find entries in the Calculated level column.
What does the Calculated level indiicate for those software components?
- A. The SAP Support Packages that will be bound to the conversion
- B. The SAP Support Packages of the Support Package stack, calculated by the maintenance planner
- C. The SAP Support Packages in the download directory that are newer than the selected Support Package stack
- D. The SAP Support Packages contained in the upgrade media, calculated by the maintenance planner
Answer: C
NEW QUESTION # 31
You have selected "Standard" as scenario strategy in the SUM tool.
Which steps take place via the shaddow instance? Note: There are 2 correct answers to this question.
- A. Conversion of application tables (PARCONV_UPG)
- B. Modification adjustment (SPDD)
- C. Modification adjustment (SPAU)
- D. Activation of dictionary objects (ACT_UPG)
Answer: B,D
NEW QUESTION # 32
You are planning an SAP S/4HANA conversion.
Which conversion-specific tasks muust be performed during the preparation phase?
- A. Perform the migration of data to the new data structure.
- B. Run the database migrationn to the SAP HANA database.
- C. Check the compatibility of custom code with SAP S/4HANA.
- D. Solve problems from the si mplification item (SI) checks.
Answer: C
NEW QUESTION # 33
What is the main purpose of perforrming benchmark runs for an SAP S/4HANA conversiion?
- A. To optimize the main import
- B. To optimize the conversion
- C. To optimize the activation
- D. To optimize the migration
Answer: D
NEW QUESTION # 34
You are performing an SAP S/4HAN A conversion with DMO. You are using the downtimme-optimized data conversion (DoC).
Which steps can partially be moved to uptime processing? Note: There are 2 correct annswers to this question.
- A. Main import
- B. Migration
- C. Conversion
- D. Software update
Answer: B,C
NEW QUESTION # 35
What do you need to consider when performing the SI checks for an SAP S/4HANA connversion? Note: There are 2 correct answers to this question.
- A. The errors from the SI checks must be solved; otherwise, SUM will report an errror.
- B. You need an SAP system baased on AS ABAP 7.52 or above for the SI check frammework.
- C. You need to build up an SI check framework by applying SAP Notes.
- D. The Si checks are executed in the development system and the results are trannsported into the subsequent systems.
Answer: A,C
NEW QUESTION # 36
What do you need to know about the SAP S/4HANA Conversion Guide? Note: There are 2 correct answers to this question.
- A. It explains the database migration option (DMO) of SUM.
- B. It contains a section about the simplification item (SI) checks.
- C. It is a operating system-speecific document.
- D. It explains where to find infformation about the custom code analysis.
Answer: B,D
NEW QUESTION # 37
What are the benefits of using the benchmarking option of the DMO for SUM? Note: There are 2 correct answers to this question.
- A. You can find the optimal nuumber of parallel R3load processes by monitoring hoost performance.
- B. You can record the modification adjustment during migration and use the transports in the next runs.
- C. You can obtain migration duration files from a previous benchmark run that caan be used to optimize the next runs.
- D. You can verify that the conttent of the download directory matches the stackXMML file.
Answer: A,C
NEW QUESTION # 38
......
New E-S4CON-2025 Exam Questions Real SAP Dumps: https://validtorrent.prep4pass.com/E-S4CON-2025_exam-braindumps.html
