Prep4pass 5V0-41.21 dumps & VMware NSX-T Data Center Security Skills 2023 Sure Practice with 72 Questions
New 5V0-41.21 Exam Questions| Real 5V0-41.21 Dumps
NEW QUESTION 34
Which dot color indicates an on-going attack of medium severity in the IDS/IPS events tab of NSX-T Data Center?
- A. blinking orange dot
- B. solid red dot
- C. solid orange dot
- D. blinking yellow dot
Answer: C
Explanation:
The dot color that indicates an on-going attack of medium severity in the IDS/IPS events tab of NSX-T Data Center is a solid orange dot. This indicates that the attack has been detected and is ongoing at a medium severity level.
Reference:
In the IDS/IPS events tab of NSX-T Data Center, different colors of dots are used to indicate the severity of an attack.
A solid red dot indicates a critical attack, which is the highest severity level.
A solid orange dot indicates a medium attack, which is a moderate severity level.
A solid yellow dot indicates a low attack, which is the lowest severity level.
In this case, a solid orange dot is used to indicate an on-going attack of medium severity in the IDS/IPS events tab of NSX-T Data Center.
It's worth noting that there is no blinking dots in this context, all the dots are solid.
VMware NSX-T Data Center documentation https://docs.vmware.com/en/VMware-NSX-T-Data-Center/index.html VMware NSX-T Data Center Intrusion Detection and Prevention documentation https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/com.vmware.nsxt.ids.doc/GUID-C4ED1F4D-4E4B-4A9C-9F5C-7AC081A5C5D5.html
NEW QUESTION 35
Which is an insertion point for East-West service insertion?
- A. Guest VM vNlC
- B. tier-1 gateway
- C. Partner SVM
- D. transport node
Answer: A
Explanation:
East-West service insertion refers to the ability to insert security services, such as firewall and intrusion detection and prevention, between virtual machines (VMs) that are communicating within the same logical network.
One of the insertion points for East-West service insertion is the virtual network interface card (vNIC) of the guest VM. The vNIC is the virtual representation of a physical NIC on a VM, and it connects the VM to the virtual network. By inserting security services at the vNIC level, traffic between VMs can be inspected and secured before it reaches the virtual switch.
VMware NSX-T Data Center documentation https://docs.vmware.com/en/VMware-NSX-T-Data-Center/index.html VMware NSX-T Data Center Security documentation https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/com.vmware.nsxt.security.doc/GUID-8F7C8B70-F1A6-4F31-8D6C-A0A9B9C9A9D3.html
NEW QUESTION 36
Which three security objects are provided as an output in a recommendation session in NSX Intelligence? (Choose three.)
- A. context profiles
- B. security groups
- C. gateway firewall rules
- D. distributed firewall rules
- E. security service
Answer: C,D,E
Explanation:
NSX Intelligence uses machine learning algorithms to analyze network traffic and provide recommendations for security and compliance. These recommendations include the following security objects:
Distributed Firewall Rules: Distributed firewall rules are used to control traffic between virtual machines within a logical network. NSX Intelligence can recommend new distributed firewall rules based on traffic patterns it observes in the network.
Security Service: Security services are used to protect virtual machines and networks from threats. NSX Intelligence can recommend new security services to be deployed based on traffic patterns it observes in the network.
Security Groups: Security groups are used to group virtual machines and networks together for security and management purposes. NSX Intelligence can recommend new security groups to be created based on traffic patterns it observes in the network.
1. context profiles are not an output from a recommendation session in NSX Intelligence. It is used to define the context of the network traffic that is being analyzed, such as the type of device, the network location, or the user.
2. gateway firewall rules are not an output from a recommendation session in NSX Intelligence. Gateway firewall rules are used to control traffic between logical networks, such as between a VLAN and a VXLAN, or between a logical network and the physical network.
Reference:
VMware NSX Intelligence documentation https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/com.vmware.nsxt.intelligence.doc/GUID-F2F1D7E8-F6B2-4870-9E Top of Form Bottom of Form
NEW QUESTION 37
Refer to the exhibit.
Referencing the exhibit, what is the VMware recommended number of NSX Manager Nodes to additionally deploy to form an NSX-T Manager Cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 38
What is one of the main use-cases of NSX-T Endpoint Protection?
- A. Use Network Security Services of a third party vendor
- B. North-South Firewalling
- C. East-West Firewalling
- D. Agentless Antivirus
Answer: C
NEW QUESTION 39
Which three arerequired to configure a firewall rule on a getawayto allowtraffic from the internal to web servers? (Choose three.)
- A. Add a firewall rule in Local Gateway category.
- B. Createa firewall rule in System category.
- C. Create a URL analysis profile for web hosting category.
- D. Create a firewall policy in Local Gateway category.
- E. Disable the firewall rule in Default category.
- F. Enable Firewall Service for gateway.
Answer: A,B,E
NEW QUESTION 40
Refer to the exhibit.
An administrator is reviewing NSX Intelligence information as shown in the exhibit.
What does the red dashed line for the UDP:137 flow represent?
- A. Discovered communication
- B. Unprotected communication
- C. Blocked communication
- D. Allowed communication
Answer: C
NEW QUESTION 41
Which is the port number used by transport nodes to export firewall statistics to NSX Manager?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
The port number used by transport nodes to export firewall statistics to NSX Manager is 4789.
For further reading, see the VMware NSX-T Data Center Administration Guide (https://pubs.vmware.com/NSX-T-Data-Center/index.html#com.vmware.nsxt.admin.doc/GUID-15A2EBC2-C39D-45F3-B847-DC18F7B1E9B9.html) for more information on transport nodes and firewall statistics.
NEW QUESTION 42
A customer has a requirement to achieve Zero-Trust Security and minimize operational overhead. Which VMware solution can be used by the customer to achieve the requirement?
- A. NSX Manager
- B. Tanzu Kubernetes Grid
- C. NSX Intelligence
- D. Carbon Black Anti-Virus
Answer: D
NEW QUESTION 43
A security administrator is required to protect East-West virtual machine traffic with the NSX Distributed Firewall.What must be completed with the virtual machine's vNIC before applying the rules'
- A. It must be connected to a vSphere Standard Switch.
- B. It is connected to a transport zone.
- C. It is connected to the underlay.
- D. It is connected to an NSX managed segment.
Answer: D
NEW QUESTION 44
What is one of the main use-cases of NSX-T Endpoint Protection?
- A. Use Network Security Services of a third party vendor
- B. North-South Firewalling
- C. East-West Firewalling
- D. Agentless Antivirus
Answer: D
Explanation:
NSX-T Endpoint Protection provides agentless antivirus protection for virtual machines running on VMware ESXi hosts. It uses the VMware vShield Endpoint API to scan the virtual machines without requiring the installation of antivirus agents. The service is integrated with third-party antivirus solutions, such as McAfee and Symantec, to provide real-time protection against malware and other threats.
For more information on NSX-T Endpoint Protection, please refer to the NSX-T Data Center documentation: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsx-t-3.0-endpoint-protection/GUID-25C22F02-4B30-47D4-8F0C-3BC9F9C3AFD3.html
NEW QUESTION 45
What is the NSX feature that allows a user to block ICMP between 192.168.1.100 and 192.168.1.101?
- A. NSX Distributed Switch Agent
- B. NSX Distributed IDS/IPS
- C. NSX Distributed Routing
- D. NSX Distributed Firewall
Answer: D
Explanation:
NSX Distributed Firewall is used to create firewall rules to control traffic between networks.
For further reading, see the VMware NSX-T Data Center Administration Guide (https://pubs.vmware.com/NSX-T-Data-Center/index.html#com.vmware.nsxt.admin.doc/GUID-4B6A4A87-F9C7-4AAB-923F-C6B84C33AF7D.html) for more information on configuring firewall rules.
NEW QUESTION 46
Reference the CLI output.
What is the source IP address in the distributed firewall rule to accept HTTP traffic?
- A. 172.16.30.11
- B. 172.16.20.11
- C. 172.16.10.12
- D. 172.16.10.11
Answer: D
NEW QUESTION 47
Which two are used to define dynamic groups for an NSX Distributed Firewall? (Choose two.)
- A. segment
- B. tags
- C. physical servers
- D. machine name
- E. segment's port
Answer: B,D
Explanation:
For further reading, see the VMware NSX-T Data Center Administration Guide (https://pubs.vmware.com/NSX-T-Data-Center/index.html#com.vmware.nsxt.admin.doc/GUID-BEDA8D9F-ACBC-42B1-B7F5-FEEF0E0D899C.html) for more information on configuring dynamic groups.
NEW QUESTION 48
Which three criteria help to determine the severity for a Distributed IDS/IPS? (Choose three.)
- A. The type-rating associated with the classification type.
- B. The severity specified in the signature itself
- C. The load balancer deployment type.
- D. The Common Vulnerability Scoring System score specified in the signature.
- E. The Distributed Intrusion Detection and Intrusion Prevention rules.
Answer: A,B,D
Explanation:
For further reading, see the VMware NSX-T Data Center Administration Guide (https://pubs.vmware.com/NSX-T-Data-Center/index.html#com.vmware.nsxt.admin.doc/GUID-E6B25C6F-1F25-4B0F-B8AF-6B8C00F9C3A3.html) for more information on configuring the Distributed IDS/IPS.
NEW QUESTION 49
When configuring members of a Security Group, which membership criteria art permitted?
- A. Segment Port, Segment, Virtual Machine, and IP Set
- B. Virtual Machine, Physical Machine, Cloud Native Service Instance, and IP Set
- C. Virtual Interface, Segment, Cloud Native Service Instance, and IP Set.
- D. Virtual Interface, Segment, Physical Machine, and IP Set
Answer: B
Explanation:
When configuring members of a Security Group, the permitted membership criteria are Virtual Machine, Physical Machine, Cloud Native Service Instance, and IP Set.
For more information on configuring members of a Security Group, please refer to the NSX-T Data Center documentation: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsx-t-3.0-security/GUID-C0F9A9A7-9A1E-41D9-A237-FED7A6F20A0A.html
NEW QUESTION 50
Which three criteria help to determine the severity for a Distributed IDS/IPS? (Choose three.)
- A. The load balancer deployment type.
- B. The Common Vulnerability Scoring System score specified in the signature.
- C. The Distributed Intrusion Detection and Intrusion Prevention rules.
- D. The severity specified in the signature itself
- E. The type-rating associated with the classification type.
Answer: A,C,D
NEW QUESTION 51
To which network operations does a user with the Security Engineer role have full access permission?
- A. Networking Load Balancing, Networking DNS, Networking Forwarding Policies
- B. Networking IP Address Pools, Networking NAT, Networking DHCP
- C. Networking Forwarding Policies, Networking NAT, Networking VPN
- D. Networking DHCP, Networking NAT, Networking Segments
Answer: D
NEW QUESTION 52
......
5V0-41.21 Braindumps – 5V0-41.21 Questions to Get Better Grades: https://validtorrent.prep4pass.com/5V0-41.21_exam-braindumps.html
