Understanding functional and technical aspects of Operating System (644-906 SPAUTO)
The following will be asked from you in the CISCO 644-906 exam dumps:
- Using the parser with pipe, include, exclude, begin, regex
- Understanding types of packages (optional PIEs)
- Deactivate PIEs or SMUs
- Assigning user privilege to root-system
- Using TAR file
- How to look at the memory utilization on the line card
- Committing the configuration (using the commit confirm feature)
- Understand what configuration is in the exec plane
- Initial or recovery software installation (ROMMON variables)
- Assigning user privilege to cisco-support
- Understand protected memory space versus shared memory and which area uses it
- Using source flag
- Understanding types of packages (SMUs)
- Locate core files and moving them to a server
- Understand the default VRF
- Show where certain processes are running
- Using TFTP, FTP, USB thumb drive, and hard drive as the source
- Configure interfaces before the physical interface is available)
- Committing the configuration (atomic versus best effort)
- Understand IOS-XR versioning and installation restrictions
- Committing the configuration (show config fail)
- Understand what is target config
- Committing the configuration (with labels and comments)
- Core file configuration location including hard drive and FTP
- How to perform process restart
- Committing the configuration (replacing the configuration)
- Committing the installation path
- Understand between admin user versus exec username
- How to use Show Tech Support commands
- How to use Show LPTS commands
- Check how much CPU a process is using
- Base assumption of EEM knowledge - understand what is possible/not possible
- Understand about LPTS policer
- How to check processes like state, number of restarts, job id, pid, tid
- Show configuration history
- Understand when a syntax check is done
- How to find a blocked process
- Initial or recovery software installation (Turboboot Mini.VM file)
- Check which packages are committed
- Understand differences between owner and non-owner SDR in access to admin plane and exec plane
- Check which packages are active
- Remove inactive packages, PIEs, or SMUs
- Understand P versus PX images and the hardware they support
- Going back to a previous configuration
- Check how much memory a process is using
- Debug commands with ACL filtering
- Understanding security certificate in PIEs and SMUs
- Understand what configuration is in the admin plane
- Show policer values and drop counts in LPTS
- See what install requests are currently active
- Understanding how task-based authorization work
- Activate PIEs or SMUs
- Assigning user privilege to root-lr
- Understand what is LPTS
- Understand when a semantic check is done
- Check installation log
- How to look at the memory utilization on the route processor
- Understanding types of packages (Mini.PIE)
- With activate flag
- Understand what is active config
- Understanding types of packages (Mini.VM)
- Showing configuration IDs and labels
- Loading configuration
Pre-trying experience
Compared with other exam study material, our 644-906 study training pdf can provide you with per-trying experience, which is designed to let you have a deep understanding about the exam dumps you are going to buy. The reason why our 644-906 exam practice training are confident to receive pre-trying check is that they are highly qualified and suitable for all kinds of people as they are possessed of three different version for people to choose from. What's more, the majority of population who has had the pre-trying experience finally choose to buy our 644-906 exam torrent as people all deem our exam training material as the most befitting study materials.
When you search the 644-906 study material on the internet, you will find many site which are related to 644-906 actual test. Here, our site is the most reliable. We have professional team, certification experts, technician and comprehensive language master, who always research the latest 644-906 valid exam guide training material, so you can be fully sure that our 644-906 latest practice can help you pass the 644-906 actual test.
Accuracy 644-906 exam training guide
An extremely important point of the 644-906 exam torrent pdf is their accuracy and preciseness. That is exactly what we have, because all questions of the Cisco 644-906 exam practice training are edited and compiled by experts who dedicated to this career for so many years, and know the core of the test just like engraved on their minds. Just spend 20 to 30 hours on the 644-906 exam pdf dumps each, then you can succeed in the test. Besides, our experts also keep up with the trend of this area, add the new points into the 644-906 exam study material timely, Which mean you can always get the newest information happened on the test trend. So the Cisco Specialist 644-906 exam dumps can help you pass the test easily.
Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
Valid 644-906 study material
The high-quality 644-906 exam training pdf is the best valid training material we recommend to all of you. For decades of efforts, we and our customers have a win-win relationship at the core of our deal, clients pass the 644-906 actual exam successfully with our specialist 644-906 exam dump, then it brings us good reputation, which is the reason why our team is always striving to develop the 644-906 latest torrent. Our innovative R&D team and industry experts guarantee the high quality and best accuracy of 644-906 exam training material. Besides, the content of our Cisco Specialist 644-906 exam practice torrent consistently catch up with the latest actual exam. We designed those questions according to the core knowledge and key point, so with this targeted and efficient 644-906 exam dump, you can pass the 644-906 : Implementing and Maintaining Cisco Technologies Using IOS XR exam easily.
Cisco 644-906 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Operating System | 19% | 1 Install a) Add a PIEs or SMUs b) Using TFTP, FTP, USB thumbdrive, and hard drive as the source c) With Activate flag d) Using Source flag e) Using TAR file 2 Licensing a) Activate PIEs or SMUs b) Initial or recovery software installation c) ROMMON Variables d) Turboboot Mini.VM file e) Deactivate PIEs or SMUs f) Remove inactive packages, PIEs, or SMUs g) Committing the Installation Path h) Check which packages are active i) Check which packages are committed j) Check installation log k) See what install requests are currently active l) Understanding security certificate in PIEs and SMUs 3 Packages a) Understanding types of packages b) Mini.PIE c) Mini.VM d) Optional PIEs e) SMUs f) Unstanding IOS-XR versioning and installation restrictions g) Understand P versus PX images and the hardware they support 4 Two-Stage Commit a) Understand what is Active Config b) Understand what is Target Config c) Understand when is a Syntax Check done d) Understand when is a Semantic Check done e) Going back to a previous configuration f) Showing configuration IDs and labels g) Show configuration history h) Loading configuration i) Committing the configuration j) Atomic versus best effort k) With labels and comments l) Replacing the configuration m) Using the commit confirm feature n) Show Config Fail o) Configure interfaces before the physical interface is available 5 Configuration Planes a) Understand what configuration is in the Admin plane b) Understand what configuration is in the Exec plane c) Understand differences between owner and non-owner SDR in access to Admin plane and Exec plane d) Understand the default VRF 6 Task-Based Authorization a) Assigning user privilege to root-system b) Assigning user privilege to root-lr c) Assigning user privilege to cisco-support d) Understand between admin user versus exec username e) Understanding how task based authorization work 7 Process a) How to perform process restart b) How to check processes like state, no. of restarts, job id, pid, tid c) Show where certain processes are running d) How to find a blocked process e) Check how much CPU a process is using 8 LPTS a) Understand what LPTS is b) Understand about LPTS Policer c) How to use Show LPTS Commands d) Show policer values and drop counts in LPTS 9 Memory a) How to look at the memory utilization on the route processor b) How to look at the memory utilization on the line card c) Understand protected memory space versus shared memory and which area uses it d) Check how much memory a process is using 10 Support a) How to use Show Tech Support commands b) Core file configuration locatioin including hard drive and FTP c) Debug commands and with ACL filtering d) Locate core files and moving them to a server 11 Parser (interacting with) a)Using the parser with pipe, include, exclude, begin, regex 12 EEM a) Base assumption of EEM knowledge - understand what is possible and not possible |
| Data Plane | 20% | 1 General Forwarding a) Understand and monitor interface counters b) Clear interface counters c) Modify interface counter load interval d) Understand the flow of packets through a router e) Describe the difference in processing of transit packets versus locally destined packets f) Understand the information stored in a forwarding table entry g) Troubleshoot packet drops 2 Access Control Lists (ACLs) a) Implement ACLs to filter traffic on an interface b) Monitor ACL counters c) Modify an existing applied ACL d) Apply ACLs in debug commands e) Resequence an ACL 3 Quality of Service (QoS) a) Implement a basic Quality of Service configuration b) Monitor Quality of Service statistics and behaviors c) Modify an existing QoS configuration d) What is the difference with QoS on IOS XR 4 NetFlow a) Describe NetFlow capabilities in IOS XR b) Implement NetFlow packet sampling c) Verify record export d) Monitor the NetFlow cache 5 Unicast Reverse Path Forwarding (uRPF) a) Implement uRPF on an interface b) Verify uRPF behavior 6 Interface IP addresses a) Configure IPv4 addresses on an interface b) Configure IPv6 addresses on an interface c) Resolve duplicate IP subnets configured on the router 7 IP Multicast a) Describe Multicast forwarding on XR platforms (egress and fabric replication, etc.) b) Monitor IP Multicast traffic c) Troubleshoot IP Multicast (RPF, mrib, mfib, olist, etc.) |
| Platform | 21% | 1 Power a) Recommend PDU as a function of facility b) Install appropriate PDU for chassis c) Monitor system power level d) Show power alarm values 2 Environmental a) Recommend environmental levels for system installation b) Verify system-detected environment is within tolerance levels c) Show environmental alarm values d) Clear environmental alarm e) Gather system envinronmental output f) Recommend rack space requirements g) Use proper grounding for installation h) Describe CRS air-flow i) Describe Cisco ASR 9000 air flow 3 Physical Architecture a) Identify CRS switch fabric b)Identfy components of CRS fabric c) Identify MSC d) Identify PLIM e) Identify RP CRS/ASR9000 f) Identify management interface g) Identify cable management h) Differentiate between single and multi-chassis i) Identify ASR9000 line cards j) Identify ASR9000 RSP k) Identify ASR9000 PDU l) Identify ASR9000 SIP-700/SPA m) Identify CRS SIP/SPA n) Identify CRS chassis o) Identify ASR9000 chassis p) Describe ASR9000 fabric 4 Inventory a) Show card status via show platform b) Show cards via show diags c) Show inventory of the system d) Differentiate between admin versus executive plane for show platform 5 Environmental (Merge?) a) Show power usage b) Show fan status c) Diff between admin vs exec plane for show platform 6 Firmware a) Undertanding what is a FPD.PIE b) Configure Auto FPD c) Understand what is Parallel FPD d) Upgrade FPD and ROMMONUpgrade e) Understand FPD versus ROMMON f) Upgrading FPDs and ROMMONs g) Showing current FPD version information |
| Management Plane | 19% | 1 Implementing SNMP on Cisco IOS-XR a) Configuring SNMP (v1, v2c, v3) - Does everyone use SNMPv3? b) Configuring SNMP trap notifications c) Configuring SNMP views, SDRowner and Lrowner d) Configuring SNMP ifIndex persistence e) Verify SNMP configuration - e.g. using snmpget or snmpwalk 2 Implementing Logging Services on Cisco IOS-XR a) Configuring logging buffer b) Configuring syslog server host as logging destination c) Configuring terminals for logging display (term mon) d) Configuring logging facility e) Configuring local logging device and archiving f) Monitoring logging buffer and filtering messages 3 Implementing Physical and Virtual Terminals a) Configuring line templates, vty pools b) Configuring exec timeout c) Securing vty line and vty access d) Verify vty access-group configuration 4 Implementing SSH Access on Cisco IOS-XR a) Configuring SSH server (including crypto key generation) b) SSH client usage c) Verify SSH configuration 5 Implementing Telnet Access on Cisco IOS-XR a) Configuring telnet server on IOS-XR 6 Implementing XML Management on Cisco IOS-XR a) Describe XML management on IOS-XR b) Configuring XML agent on IOS-XR c) Configuring VRF access for XML agent on IOS-XR 7 Implementing TACACS+ Authentication, Authorization and Accounting a) Configuring AAA Authentication - Using TACACS+ and local as fallback b) Confguring AAA Command Authorization - Using TACACS+ and local as fallback c) Configuring AAA Command Accounting d) Implementing TACACS+ - Assigning task groups and privileges e) Verify AAA permissions upon command failure (i.e. debug aaa) 8 Configuring CDP on Cisco IOS-XR a) Enable CDP on IOS-XR b) Monitor CDP neighbors and parameters 9 Implementing Management Plane Protection (MPP) on Cisco IOS-XR a) Configuring MPP to restrict access from specific IP Addresses and protocols b) Configuring MPP to restrict access for out-of-band interface 10 Implementing NTP on Cisco IOS-XR a) Configuring NTP server b) Configuring NTP peer c) Securing NTP configurations (NTP access groups) d) Verifying NTP status 11 Implementing SDRs on IOS-XR a) Understand SDR b) Describe DSC c) Assigning SDR access priviledges d) Creating SDRs, adding nodes to non-owner SDRs e) Creating username and passwords for non-owner SDRs f) Rebooting non-owner SDRs 12 Chassis and Hardware Management a) Displaying installed modules, status of modules b) Displaying environmental status (fan, power, etc) c) Enabling and disabling power to a specific line card or module d) Reloading line card or module e) Displaying chassis and module serial numbers f) Reloading RP g) Reloading entire chassis h) Troubleshoot reason why PLIM/MSC is not booting up 13 Implementing EEM on Cisco IOS-XR |
| Control Plane | 21% | 1 Configuring OSPF a) Configure interfaces to be part of the backbone area b) Configure additional interfaces to be part of non-backbone area c) Configure non-default metric on some interfaces d) Configure neighbor logging so adjacency changes can be monitored 2 Verify OSPF a) Determine status of OSPF interfaces b) Determine status of neighbors c) Display OSPF database and determine which links are present 3 Configure ISIS a) Configure the ISIS NET b) Enable ISIS for ipv4 unicast routing c) Configure interfaces for ISIS routing d) Enable ISIS for ipv6 unicast routing e) Enable some but not all of the ipv4 enabled interfaces for ipv6 routing 4 Verify ISIS a) Determine status if interfaces configured for ISIS b) Determine the status of the routing adjacencies c) Display the ipv4 unicast route table d) Turn and debugging for ISIS adjacencies and explain the information shown e) Display the topologies for IPv4 and IPv6. Why are they different? 5 Add Static Routes a) Configure static routes for IPv4 unicast in the global table b) Configure static routes in for IPv4 unicast in two different VRFs 6 Configure BGP a) Configure an autonomous system number for BGP to use b) Configure BGP to support IPv4 routing c) Configure BGP to support IPv6 routing d) Configure iBGP neighbors with the typical configuration to use loopback addresses for peering: e) Use neighbor-groups for identical configuration sections on multiple peers f) Configure one iBGP neighbor to exchange both IPv4 and IPv6 prefixes over an IPv4 session g) Configure one iBGP neighbor as an IPv6-only neighbor with IPv6 peer addresses h) Configure eBGP neighbors for IPv4 routing i) Configure a simple pass_all policy for those eBGP neighbors j) Add VPNv4 capability to one iBGP peer k) Add two VRFs into BGP and redistribute static routes into BGP for VPNv4 l) Configure one iBGP peer to support 6PE type functionality by adding address-familiy IPv6 labeled-unicast 7 Verify BGP a) Display the peer summary status for IPv4 and IPv6 b) Display the IPv4 BGP table c) Display a specific entry and explain AS path and next-hop information d) Determine how much memory the BGP process uses 8 Understanding RPL Concepts a) Configure RPL b) Define an AS-set for use in RPL c) Create a route policy that checks for an AS from the AS-set and adds a community for matching routes d) Create a route-policy that uses an inline prefix-set and changes the local preference when a match is found e) Create a route policy that adds a community where the community is used as a parameter when the policy is called 9 Verify RPL a) Verify that communities are added as expected b) Execute a show bgp… command using a route-policy to modify the output. Compare to regular show command. 10 MPLS LDP a) Configure router to run LDP b) Configure router to log neighbor events c) Enable LDP on interfaces d) Execute show command to verify status of LDP neighbors 11 MPLS TE a) Configure OSPF to support traffic engineering extensions b) Enable RSVP on interfaces c) Create an MPLS TE tunnel with two different path options: d) First path explicit e) Second path dynamic 12 Execute Show Command to Determine Tunnel Status at Tunnel Head a) Execute show command to determine tunnel midpoints traversing the router 13 Configure IP Multicast a) Configure PIM-SM, PIM-SSM, PIM-SSM range b) Configure static-RP, Auto-RP, and BSR for PIM-SM c) Confiigure Multicast NSF d) Configure Multicast VPN e) Configure MSDP for interconnecting PIM-SM domains f) Configure MoFRR g) Configure P2MP-TE for IP Multicast |
Difficulty in Attempting Implementing and Maintaining Cisco Technologies Using IOS XR (IMTXR)
Our CISCO 644-906 practice exam and CISCO 644-906 exam dumps contains all the material needed to pass the exam. It has a list of course topics, practice exams and exams and goes from basic to complex knowledge slowly.
How much Implementing and Maintaining Cisco Technologies Using IOS XR (IMTXR) costs
- Types of questions: Performance Based Questions
- Passing Score: 300 or higher
- Examination Name: Implementing and Maintaining Cisco Technologies Using IOS XR (IMTXR)
- Length of Exam: 75 min
- Examination Fees: $200 USD
- No of Questions: 55 Questions
Ingram 
Annabelle 
Trista 
Ruth 
Vivien 
Chapman 
Harold 
Justin 
Lilith 
Kyle 
Maxine 
Elsie 
Katherine 
Odelia 
Barnett 
Kirk 
Meredith 
Betsy 
Carr 
Noah 
Allen 
Len 
